Maximum Door size not to exceed 650mm in width, minimum sze for one blade 220mm
Replace the DEFAULT values in the PROMPT box with your required value and highlight any specific Options - then click on 
to record this selection on your "Shopping Cart" .
A firm calculated price will be recorded on the Shopping Cart List - the smaller the sizes the lower the price etc.
NOTE: Minimum Width(Door size) = 220mm; Maximum Width 600mm. - Maximum Depth = 700mm.
Height = Box Height Only (this does not include height of the Kickboard).
LH Width = Left Hand Width of the Carcase (Cabinet) - excluding any Coloured Panels that may be required to be screwed on later.
RH Width = Right Hand Width of the Carcase (Cabinet) - excluding any Coloured Panels that may be required to be screwed on later
LH Depth = Left Hand Outside Depth of Floor Cabinets including Door
RH Depth = Right Hand Outside Depth of Floor Cabinets including Door
Number of shelves required= Specify the number needed from 0-7 - the standard (in this case 1x Shelf).
Shelves = is to indicate Fixed or Adjustable shelving.
Shelf Depth = Offset (Set in) of Shelf from the Door. Select either the suggested value as a default, Full depth of the cabinet, or one of the other options.
Door Hang = Select Right, Left or None as required.
"Special Requests" can be used to: (for example) state you preferred Door Gap measure e.g. 1mm (in place of our standard 1.5mm); or any other need e.g. 'No shelf holes to be drilled'.
When you [CLICK] on the "Add To Cart" button the Product specifications are listed on a 'Shopping List' ("Shopping Cart")
Only when you are ready and the Items have been validated for consistency on YOUR PC will you be prompted to submit your personal details and the contents of the shopping cart to the central system to obtain a QUOTE , a possible shipment date and a request for a small deposit.
Your data will be stored for some 12 days on your PC to allow easy order specification and amendment.
Use 
button to return to the Product Page
